Browse by everyday use case, then check fit, tradeoffs, and details worth confirming before you open a seller page.
A parts-only 22 GHz spectrum analyzer with tracking generator versus an EXA signal analyzer with installed options: pick the repair project that matches your bench and repair budget.
Compare the $299.95 Aeroflex IFR Marconi 2390 parts-unit with the $36,500 Agilent Keysight E5052B analyzer to see which fits your lab or repair bench.
Used 100 MHz or new-in-box 150 MHz? This head-to-head weighs the HP 54600B and HANTEK DSO2D15 by price, condition, bandwidth, and workbench fit.
We compare the Tektronix TDS220 at $149.99 with the Hantek DSO2D15 at $370.50 to see whether the new 150 MHz model is worth the higher price.
Compare the portable FNIRSI 2C53T handheld scope with the new HANTEK DSO2D15 digital storage oscilloscope. This head-to-head covers price, bandwidth, condition, and which one fits your test and measurement workflow.
The used Tektronix TDS 380 delivers 400 MHz and 2 GS/s for $195, while the new HANTEK DSO2D15 offers a 150 MHz digital storage scope for $370.50. Here's how to choose.
Compare the FNIRSI 2C53T, a Used handheld oscilloscope/multimeter/signal generator at USD 64.50, with the Agilent N9010A EXA, a 9 kHz to 7 GHz RF analyzer at USD 4,111 that is for parts or not working. This head-to-head helps you decide which test tool fits your bench.
Compare a used Tektronix TDS220 at $149.99 with a new Hantek DSO2000 series at $199.97. See which oscilloscope suits your bench: basic two-channel viewing or extra features like a built-in waveform generator.
The used Tektronix TDS 380 delivers 400MHz bandwidth and 2GS/s sampling, while the new Hantek DSO2000 adds a built-in waveform generator and protocol decoding. Priced $195 vs $199.97, the choice is classic bench feel versus modern all-in-one capability.
FNIRSI 2C53T vs Agilent N9010A: choose between a used handheld scope at $64.50 and a parts-only 9 kHz to 7 GHz analyzer at $4,850.
The FNIRSI 2C53T brings a 50 MHz handheld scope, multimeter, and signal generator for $64.50, while the Digilent Analog Discovery 2 offers a 30 MHz USB scope with 14-bit resolution and WaveForms 2015 for $150. This head-to-head helps you choose between portability and PC-based measurement.
Choosing between the Tektronix TDS 380 and HP 54600B comes down to how much bandwidth and sampling speed your bench needs versus how much you want to spend. This head-to-head breaks down the $135 vs $195 used scope decision.
Compare the Aaronia HF 6080 and Agilent Keysight E5052B on price, signal analysis approach, and measurement depth. One is a PC-based RF spectrum analyzer; the other is a 10 MHz-7 GHz phase noise and signal source analyzer.
Torn between a used two-channel 400 MHz scope and a new four-channel 70 MHz mixed-signal model? This head-to-head compares the Tektronix TDS 380 and Siglent SDS804X HD so you can match channels, bandwidth, and budget to your bench work.
A used two-channel Tektronix with 100 MHz bandwidth goes up against a new four-channel Siglent with 70 MHz. Choose based on channel count, bandwidth, and condition.
Comparing the $64.50 FNIRSI 2C53T handheld scope with the $135 HP 54600B: one packs a multimeter and signal generator, the other offers 100 MHz bandwidth plus a case and front cover.
The FNIRSI 2C53T is a $64.50 handheld oscilloscope with a signal generator and multimeter; the Agilent Keysight E5052B is a $36,500 10MHz-7GHz signal source/phase noise analyzer. Here is how to choose based on your bench work.
A $64.50 handheld scope/multimeter/signal generator vs a $650 vintage spectrum analyzer/noise generator. See how the FNIRSI 2C53T and Ivie IE-30A/IE-30B compare.
Comparing the FNIRSI 2C53T and Hantek DSO2000 series? See how their price, channels, bandwidth, and built-in generators stack up to choose the right oscilloscope for your tasks.
The BDS PP-131 is a $275.50 open-box spectrum display with stereo input and adjustable display modes. The tested Ivie IE-30A/IE-30B pair costs $650.00 and adds a noise generator. See which fits your signal-analysis bench.
The HoldPeak 3-in-1 packs a 50 MHz handheld scope, multimeter, and signal generator for $79.99. The Siglent SDS804X HD offers four 70 MHz analog channels and optional mixed-signal expansion for $461. Which one is the right fit?
A 50MHz handheld oscilloscope multimeter signal generator at $79.99 or a 150MHz two-channel digital storage oscilloscope at $370.50? Here is how to choose based on portability, bandwidth, and bench workflow.
Comparing the Aaronia HF 6080 PC-based spectrum analyzer with the Agilent N9010A EXA benchtop unit. Two very different prices, two very different conditions - find out which RF analyzer suits your bench.
The FNIRSI 2C53T is a $64.50 portable dual-channel scope with a built-in multimeter and signal generator. The Tektronix TDS220 trades portability for 100 MHz bandwidth and 1 GS/s sampling at $149.99. Use this head-to-head to pick.
A $225 4-in-1 oscilloscope and a $36,500 signal source analyzer serve very different needs. Compare bandwidth, frequency range, and intended use to see which one fits your bench.
A used 100 MHz Tektronix and a more expensive 4-in-1 FNIRSI with signal generation and spectrum analysis: choose the lower-cost scope or the multi-function bench tool.
Weighing a $199 portable TinySA Ultra+ ZS407 against a $3,950 used Rohde & Schwarz FSU, this head-to-head helps you choose between portability and advanced signal generation.
This head-to-head weighs the $225 FNIRSI DPOS350P 4-in-1 oscilloscope against the $4,111 Agilent N9010A EXA, an as-is RF analyzer with a 9 kHz to 7 GHz range and reported faults.
Compare the affordable FNIRSI 2C53T handheld scope with the Tektronix TDS 380 bench oscilloscope. Which used two-channel digital scope fits your budget and bench?
Comparing the Hantek DSO2000 and Digilent Analog Discovery 2? The Hantek brings a faster 1 GSa/s sampling rate and a built-in waveform generator, while the Digilent pairs 14-bit resolution with WaveForms software at a lower listed price. Here's how to choose.
A used 400 MHz benchtop workhorse and a 30 MHz USB scope with 14-bit resolution go head-to-head. See how price, bandwidth, sampling, and workflow decide the right oscilloscope for you.
Two used Agilent signal analyzers anchor opposite ends of the price scale. The N9320B delivers a 9 kHz to 3 GHz RF spectrum analyzer for $1,200, while the E5052B is a 10 MHz to 7 GHz signal source and phase noise analyzer for $36,500. Here's how to decide which one matches your bench work.
The FNIRSI 2C53T is a handheld dual-channel scope with a built-in multimeter and signal generator; the Siglent SDS804X HD is a 4-channel mixed-signal scope with 70 MHz bandwidth. We compare them to help you pick the right one for your work.
Choosing between a $39.98 TinySA spectrum analyzer and a $650 Ivie IE-30A with IE-30B noise generator comes down to frequency range, portability, and whether you need a noise source.
TinySA Ultra+ ZS407 is a $199 portable RF spectrum analyzer and signal generator, while the BDS PP-131 is a $275.50 31-segment audio spectrum display. This head-to-head helps you choose between RF field testing and audio visualization.
The Sencore FS74 is a $150 broadcast analyzer with a CRT, while the Agilent Keysight E5052B is a $36,500 signal source and phase noise analyzer. This head-to-head compares their strengths and helps you choose the right tool for your bench.
Compare the used Tektronix TDS 380 benchtop scope with the new HoldPeak 3-in-1 handheld. Which fits your bench or field work?
Compare the used Tektronix TDS220 benchtop oscilloscope with the new HoldPeak Digital 3in1 handheld scope and multimeter. See which one matches your bench or field needs, from bandwidth to portability.
The FNIRSI DPOS350P offers higher bandwidth, a built-in signal generator, and a lower price, while the Siglent SDS804X HD brings four analog channels and an expandable mixed-signal platform. Here's how to choose.
The $225 FNIRSI DPOS350P packs a signal generator and spectrum analyzer into a 7-inch digital scope; the $195 Tektronix TDS 380 offers 400MHz bandwidth and 2GS/s sampling. Here's how to choose.
Choosing between the $225 FNIRSI DPOS350P 4-in-1 oscilloscope and the $4,850 Agilent N9010A EXA RF signal analyzer comes down to whether you need a ready-to-use bench tool today or are willing to take on a surplus repair project.
Choosing between the Aaronia HF 6080 and the Sencore FS74 Channelizer SR? This head-to-head compares a PC-based RF spectrum analyzer with a dedicated TV-RF channelizer to help you pick the right used unit.
The Agilent N9010A EXA is a surplus RF signal analyzer at $4,111 sold as-is with known errors, while the Agilent Keysight E5052B is a used signal source analyzer at $36,500. This head-to-head helps you decide which instrument fits your budget and repair tolerance.
The used Tektronix TDS220 and the open-box Digilent Analog Discovery 2 offer two very different scope workflows for nearly the same budget. This guide helps you pick the right one.
A $199 portable spectrum analyzer with a touchscreen and 32GB storage squares off against a $36,500 used lab-grade phase noise analyzer. Find out which signal spectrum analyzer matches your work.
Choosing between the Sencore FS74 TV-RF analyzer at $150 and the Agilent N9320B 9 kHz to 3 GHz spectrum analyzer at $1,200 depends on whether you need broadcast signal checks or general RF measurement.
Need a signal spectrum analyzer? The Agilent Keysight E5052B is a used 7 GHz unit at $36,500; the Agilent N9010A EXA is a $4,850 parts-only RF analyzer. See which fits your bench.
Choosing between the USD 36,500 Agilent Keysight E5052B signal source/phase noise analyzer and the USD 650 Ivie IE-30A/IE-30B spectrum analyzer with noise generator comes down to measurement depth versus a tested vintage pair.
Deciding between the portable HoldPeak 3-in-1 oscilloscope multimeter and the higher-spec Hantek DSO2000 series? This head-to-head compares price, bandwidth, and built-in tools.
The BDS PP-131 turns audio into a 31-segment spectrum display; the TinySA measures radio frequencies and doubles as a signal generator. This head-to-head helps you pick the right one for your workbench.
Finding more guides for you…