When you are setting up an RF network cable and telecom test bench, the first decision is usually not which brand to buy but which job you need to get done: generating a test signal or measuring the signal that comes out. The EICO Model 324 Signal Generator and the For V7.0 RF Power Meter sit on opposite sides of that question. The EICO is a fully working vintage signal generator; the V7.0 is a new RF power meter built for measurement work. The right choice depends on whether your next task is injecting a signal into a receiver or verifying the power an amplifier actually puts out.
Quick verdict
Choose the EICO Model 324 if your work involves feeding a known RF signal into radios, receivers, or amplifier inputs and you want a US-made unit that is ready to go. Choose the For V7.0 RF Power Meter if your priority is measuring output power, checking amplifier output, or logging RF levels through a computer-connected meter. The EICO creates signals; the V7.0 measures them.
EICO Model 324 vs V7.0 RF Power Meter at a glance
| Feature | EICO Model 324 Signal Generator | For V7.0 RF Power Meter |
| Price | USD 99.99 | USD 155.54 |
| Condition | Used | New |
| Core purpose | Signal generation | Power measurement |
| Frequency capability | Vintage RF radio test equipment | Supports acquisition up to 10GHz |
| Interface | Vintage controls | Type-C for power and data |
| Price indicator | | |
Where each product wins
The EICO Model 324 wins for signal generation. It is the tool to use when you want a known signal to send into a circuit. It also costs $55.55 less than the V7.0 at its $99.99 price, making it the lower-priced way to add a signal source to the bench.
The V7.0 RF Power Meter wins for measurement. Its new construction, computer-connected workflow, and built-in digitally programmable attenuator make it a stronger match for measurement work. It measures rather than generates, so pair it with a source if your test loop needs both.
Product notes
EICO Model 324 Signal Generator Vintage RF Radio Test Equipment FULLY WORKING
With its gray metal case and US-built EICO name, this vintage signal generator is for someone who wants a direct RF source on the bench without a complicated setup. The unit is sold as fully working, and its model number 324 identifies it as dedicated radio test equipment rather than a multi-purpose accessory. Use it to feed a known signal into a receiver or amplifier while you troubleshoot a stage. The trade-off is that it is a used vintage piece, so its performance expectations are tied to its age and original radio-era design. It does not offer the modern digital interface of the V7.0, but its job is to create the signal, not to analyze what comes back.
For V7.0 RF Power Meter 10GHz RF Test Equipment for Amp Gain Measurement
The V7.0 is the measurement-focused instrument for a newer bench setup. It is a compact RF power meter with a Type-C interface that provides 5V power and data communication over the same cable. That makes it convenient for checking amplifier gain while you adjust a circuit, especially with RF signal acquisition up to 10GHz and a built-in digitally programmable attenuator. The meter is sold as new, which removes the guesswork of buying used gear. The limitation is that it is not a signal generator: it tells you how much power is present, but it cannot inject a test signal into a radio or receiver.
Final choice by use case
Pick the EICO Model 324 when the job starts with a known RF signal: feeding a receiver, driving an amplifier input, or checking a radio stage. Pick the For V7.0 RF Power Meter when the job ends with the output: measuring amplifier output, confirming power levels, or logging RF levels. If your bench spans both tasks, these two cover separate halves of the same RF test loop.
