Oscilloscope Shopping: 100 MHz With Signal Generator or 150 MHz HANTEK?
Comparing FNIRSI 1014D listings with built-in signal generators and a HANTEK DSO2D15 for higher bandwidth. Use-case picks included.
Test, Measurement & Inspection Reviews & Buying Guides
Compare test, measurement & inspection by use case, features, trade-offs, price, returns, and seller terms before you buy.
Latest reviews
View more reviews
How to Choose an Insulation Resistance Tester: Uei, Klein, and Fluke
Insulation resistance testers span $145 to $301.99. Compare the Uei IRT803, Klein ET600, and two Fluke 1503 options to find the right fit for your electrical testing work.
Lab Balances Scales: Analytical Precision vs. Everyday Readability at Four Price Points
Compare four lab balances and scales with listed prices from $51.99 to $254.14, spanning analytical-level precision and general lab readability, to match capacity and price to the work you actually do.
PRP Microcentrifuge or 40L Overhead Stirrer? Lab Centrifuge, Mixer, and Homogenizer Options Compared
Compare a plasma PRP microcentrifuge, two overhead stirrers, and a shear homogenizer across listed prices and speed ranges to match the right bench tool to your lab work.
AD584 Resistance Standard Reference Board: A Compact Calibration Aid for Multimeter Checks
We look at the AD584 Resistance Standard Calibration Test Equipment, a pocket-size reference board for multimeter calibration, and help you decide if it fits your test bench needs.
Industrial Scientific Tango TX1 Single Gas Monitor: What to Know Before You Buy
A close look at the Industrial Scientific Tango TX1 single gas monitor, a handheld detection instrument for industrial settings, listed at USD 124.99.
RIDGID CA-25 Micro Visual Inspection Camera Review: A 2.7-Inch Handheld Diagnostic Tool for Tight Spaces?
The RIDGID CA-25 Micro Visual Inspection & Diagnostic Handheld Camera combines a 2.7-inch screen, flexible shaft, and adjustable LED lights in a compact tool for $52.99. This guide breaks down its strengths and limitations for everyday visual inspections.
Keysight N1996A Spectrum Analyzer Review: Is 100 kHz-3 GHz Enough for Your RF Bench?
This used Keysight N1996A CSA brings spectrum analysis, channel power measurements, and scalar network analysis across 100 kHz-3 GHz for USD 1,100.00. Here's who the 3 GHz upper range really suits.
Fluke MicroScanner2 MS2-100 Cable Verifier at $375: Should You Buy a Used One?
The Fluke Networks MicroScanner2 MS2-100 is a cable verifier with a soft case, sold at $375. This review looks at the heavy-use condition and who should consider this used test tool.
TOMLOV 4.3-Inch Digital Microscope: Is Its Built-In Scale Right for Coin Collectors?
The TOMLOV 4.3-inch Digital Microscope combines 200X viewing, an HD LCD display, LED lighting, and a 0.1g-resolution scale in one collector-focused tool. It makes the most sense when inspecting coins and recording their weight are part of the same task.
16L Digital Forced Air Convection Drying Oven at USD 299: Does It Fit Your Lab Bench?
The 16L Digital Forced Air Convection Drying Oven is listed at USD 299 with a stainless steel chamber, 0.1°C temperature resolution, and a 0-999 minute timer. This guide looks at the specs that matter for small lab drying and heating jobs.
Klein Tools 69149P Multimeter Voltage Tester Outlet Test Kit: Is It Worth Buying?
The Klein Tools 69149P bundles a manual-ranging digital multimeter, non-contact voltage tester, and receptacle tester for USD 34.99. It's a practical setup for basic electrical checks, though the MM300 requires you to set the range yourself.
Airthings 2960 Radon Air Quality Monitor: Is It Worth $200 for Multi-Sensor Indoor Air Tracking?
A multi-sensor indoor air monitor with radon, CO2, VOC, and PM2.5 tracking, battery power, and WiFi. Weighing the Airthings 2960 at USD 200.00.
Crystal Pressure XP2I 5000 PSI Digital Test Gauge Review: Is This Used Gauge Worth It?
Considering a used Crystal Pressure XP2I digital test gauge? This review covers its 5000 PSI capability, battery-included setup, and the trade-offs of buying pre-owned at USD 575.99.
A&D FX-300iN Precision Balance Review: 320g Capacity, 0.001g Readability, and an Open-Box Catch
The A&D FX-300iN combines legal-for-trade precision, 0.001g readability, and a fast 1-second stabilization time in a 320g analytical balance. This open-box unit is listed at USD 330.00, but missing its manual and box makes it a smart pick only if you're comfortable downloading directions.
National Instruments High Frequency Data Acquisition System: Is This Used 16-Channel Rig Worth USD 1,500?
A used National Instruments DAQ package with a 1 MHz 16-channel PCI-6251 board, a 102.4 kHz 4-channel PCI-4474 board, and a full desktop setup for USD 1,500. See who it fits and what trade-offs matter.
Fluke Meter Alligator Clip Probes: Are These 1000V 20A Test Leads Right for Your Meter?
At USD 9.95, these alligator-clip multimeter test leads suit shoppers who want clipped connections and sharp probes for small components, with the key trade-off being their single listed test-end style.
Digital Jar Test Apparatus 4 Paddle: Is It Right for Four-Sample Flocculation Testing?
The Digital Jar Test Apparatus 4 Paddle is a specialized 110V lab mixer for running four flocculation samples at once, with digital speed control and a metal-body design.
Mitutoyo BHN506 Foot Switch: Is It Right for Hands-Free CMM Control?
The Mitutoyo BHN506 Foot Switch OFL-VG-S3 is a focused CMM accessory for operators who want foot-operated triggering while handling parts, with used condition and a USD 155.00 listed price central to the decision.
Thermal Borescope Visual Inspection: Choose a Phone-Connected or Standalone Thermal Camera
For thermal borescope visual inspection, the key choice is between compact handheld cameras and an Android USB-C thermal camera. Compare the Cusbon, AMPBANK M256, TOPDON TC004 Mini, and FLIR C5 by format, temperature tools, operating time, condition, and listed price.
You may also like
Finding more guides for you…