Choosing a flow meter usually means deciding between sensors that touch the fluid and sensors that read it from outside. The Ultrasonic Flow Meter TUF-2000M with Ultrasonic Transducer uses ultrasonic waves to measure velocity, so it avoids putting anything inside the pipe.
Ultrasonic Flow Meter TUF-2000M with Ultrasonic Transducer
This meter comes with the TUF-2000M controller and its matching transducer. The pair works by sending and receiving ultrasonic signals through the fluid to calculate flow rate, which is why it fits municipal water, wastewater treatment, and industrial process lines. The reason to choose this meter-plus-transducer package is the complete setup at USD 150; you don't have to source a separate sensor. The main trade-off is the output side: one 4-20mA output, one OCT pulse output, and one relay output are all you have for sending readings out.
Quick verdict
At this $150 package price, the TUF-2000M is a practical pick when you want non-invasive flow measurement and several output paths. It pairs the meter with a transducer, so you can start monitoring quickly.
Who it suits
It suits operators in municipal water, wastewater treatment, and industrial processes who already use analog transmitters. The 3-way analog input lets you connect three other process signals into the meter, leaving the output side flexible for totalization and alarms.
What stands out from the listed details
The new unit includes a 3-way 4-20mA signal input, which turns it into a small signal hub. On the output side, there is an analog output, an OCT pulse output, and a relay output, so you can send a flow signal to a controller, totalize pulses, and set alarm conditions.
Meaningful trade-offs
The single analog output is the main constraint. If you need to route the same flow value to multiple recorders, you'll need to use one of the other output options for the second destination.
Bottom line
If you need one ultrasonic flow meter that can gather several process signals and send out pulse, relay, and analog readings, the TUF-2000M with its transducer is a well-rounded choice. It takes the guesswork out of matching a sensor to the meter, and it fits cleanly into a municipal water or industrial monitoring panel.
