Browse by everyday use case, then check fit, tradeoffs, and details worth confirming before you open a seller page.
Compare four new Mitutoyo Absolute Digimatic digital calipers with 6″, 8″, and 12″ ranges. Use the listed-price comparison and range-based decision matrix to pick the right tool for dimensional metrology machine inspection.
Both are new 12-inch digital calipers from the Mitutoyo 500-193-30 line, listed at $89.10 and $80.00. See which listing's specs match your dimensional metrology and machine inspection needs.
Compare the Mitutoyo 500-197-30 (8 inch) and 500-193-30 (12 inch) Absolute Digimatic calipers: listed prices, measurement range, IP54 protection, and SPC output to pick the right shop tool.
Compare four Mitutoyo Absolute Digimatic digital caliper listings for dimensional metrology machine inspection, covering 6-inch, 8-inch, and 12-inch measurement ranges.
A used Nikon MC-102 DRO and three new digital calipers from $45.00 to $153.30 cover different machine inspection jobs. Match your bench to the right metrology tool.
Two Mitutoyo Absolute Digimatic calipers: a $45 6-inch model for small-part checks and an $80 12-inch model with SPC output and IP54 rating. Here is how to choose.
Need a dependable digital caliper for dimensional metrology and machine inspection? This Mitutoyo Absolute Digimatic model covers 0-200mm/8 inches with a crisp digital display and includes its original case. Here's what stands out and the trade-offs to weigh before buying.
Digital calipers for dimensional metrology and machine inspection range from a USD 21.89 stainless steel 6-inch model to a USD 153.30 Mitutoyo 8-inch model with output. This guide weighs range, resolution, and listed price to help you pick.
A 6-inch and 12-inch Mitutoyo Absolute Digimatic digital caliper pair plus a dedicated Scope CF20 optical light source for the Mitutoyo BHN506 CMM give you four inspection options spanning USD 45.00 to USD 2,698.00.
Mitutoyo's 500-197-30 and 500-193-30 are both Absolute Digimatic digital calipers, but one measures to 8 inches and the other to 12 inches. Here's which to choose for machine inspection work.
Two listings for the same Mitutoyo 500-196-30 digital caliper are separated by just $1.72. The specs match, so the choice is really about title wording and price.
The Mitutoyo 500-196-30 is a 6-inch digital caliper with four measurement modes, 0.0005-inch resolution, and absolute zero retention. At USD 45.00, it's a practical pick for routine machine inspection if you don't need SPC output.
Digital calipers for dimensional metrology machine inspection range from USD 45.26 to USD 153.30. This guide compares four Mitutoyo models by measuring range, listed price, and data output so you can pick the right one.
Genuine Mitutoyo SRD head for the BHN506 coordinate measuring machine at USD 399.00. Used condition, Japan-made, designed to read linear scale graduations for accurate axis feedback. See who it fits and what to weigh before buying.
Need a surface finish gauge for machine inspection? This portable profilometer measures Ra, Rz, Rq, and Rt with 0.01 μm indication accuracy, all in a one-button design.
Compare four dimensional metrology picks: three surface roughness testers and one digital caliper, from $45.26 to $299, with a decision guide for Ra/Rz checks and length readings.
Choosing between two Mitutoyo digital calipers: the 300mm/12" model with SPC and IP54 at $80.00, or the 150mm/6" model at $48.39 for smaller parts. See which spec matters for your machine-inspection work.
Both Mitutoyo Absolute Digimatic calipers share 0.0005-inch resolution, but they differ in measuring range, price, and SPC output. Use this head-to-head to pick the right one for your benchtop.
The Yaskawa Minertia UGTMEM-06MMT51 is a used axis-drive motor aimed at Mitutoyo BHN506 coordinate measuring machines. Its appeal is model-specific positioning performance; the main trade-off is its USD 1,998.00 price and used condition.
Choose between three closely priced 150 mm digital calipers and a 200 mm option by prioritizing measurement range, stated resolution, multi-function measurement needs, and listed price.
Both new digital calipers state a 0-6-inch measurement range and Japanese origin. The practical split is USD 45.26 versus USD 45.57, plus P1's stated resolution and no-SPC-output detail against P2's model-number-first title and IP Rating: None.
The 500-196-30 is the value pick for everyday small-part work; the 500-193-30 adds longer range and data output for documenting measurements. Here's how to choose.
A close look at the M6 Spring Fixed Board Fixed Pole L55mm CMM tension clamp: what it does, who it suits, and the trade-off to know before you buy.
Compare four digital calipers across a wide price spread, from a low-cost 6-inch model to a Mitutoyo with output, and find the right fit for dimensional metrology machine inspection.
Two new listings for the same Mitutoyo 0-200mm/8" absolute digital caliper appear at $55.80 and $110. This head-to-head shows what's different and helps you decide.
This portable roughness tester brings 0.001 mm resolution, dual mm/in readout, and zero calibration to shop-floor machine inspection. Here's what to weigh before you buy.
Compare four dimensional metrology picks from $72.28 to $299-portable digital profilometers, a Bluetooth handheld, a used Starrett, and a 30-specimen comparator-to find the right fit for your inspection needs.
The Mitutoyo BHN506 Foot Switch OFL-VG-S3 is a focused CMM accessory for operators who want foot-operated triggering while handling parts, with used condition and a USD 155.00 listed price central to the decision.
Choose between two new GOYOJO roughness meters, a used Mitutoyo Surftest 211 setup, and a Mahr Federal Pocket unit for parts/repair by matching measurement scope, included equipment, and condition to the $200-$500 listed-price range.
Four new Mitutoyo digital calipers-three 150mm/0-6" models and one 200mm/8" model-are listed from USD 44.42 to USD 110.00. This guide compares range, origin, and price to help you pick the inspection caliper that matches your work.
Four listings for the Mitutoyo 500-196-30 Absolute Digital Digimatic Caliper, priced from $44.42 to $54.00, share the same 0-6 in range and 0.0005 in resolution. Here's how to pick based on listed price and feature wording.
The 6" Digital Caliper Micrometer LCD Gauge Vernier Electronic Measuring Tool combines a 0-150 mm / 0-6 inch range, an LCD readout, and internal, external, and height measuring for USD 12.99. The trade-off is that it needs an LR44 battery that is not included.
Two near-identical Mitutoyo Japan 500-196-30 digital caliper listings-one at USD 44.42, one at USD 44.68-share the same resolution, range, and Japan origin. The decision comes down to title phrasing and a 26-cent listed-price difference.
Two nearly identical 6-inch digital calipers sit at very different prices. Compare their features and decide which LCD vernier tool fits your dimensional metrology and machine inspection needs.
The Mitutoyo 500-197-30 Absolute Digital Digimatic Caliper offers a 200mm/8-inch range and 0.0005-inch resolution at USD 110.00. Read this review to see if this new digital caliper fits your dimensional metrology needs.
Two nearly identical Mitutoyo 500-196-30 digital calipers sit 26 cents apart. Compare the lower-priced option and the higher-priced option for dimensional metrology and machine-inspection use.
The 6" LCD Digital Caliper covers internal, external, and height measurements across 0-150 mm / 0-6 in, with a large LCD and 0.01 mm accuracy. The LR44 battery is not included, and CR2032 is unsupported.
The 6" 150mm Digital Caliper offers LCD readings, four measuring modes, inch/mm conversion, and zero setting for household, DIY, and straightforward machine-dimension checks.
Finding more guides for you…