Quick Verdict
If your bench normally uses two channels, the 2x 100MHz Oscilloscope Scope analyzer Clip Probe test leads kit for HP Tektronix is the lower-total-price pick. If you expect to probe four signals at once, the 4 Four New 100MHZ Oscilloscope clip probes for HP Tektronix Hitachi, US seller puts four probes in your hands in a single purchase. Both are JINHAO P6100 100MHz passive probes, so the decision is about how many probes you want on hand and how much you want to pay in total.
Shared Foundation
Both listings are for JINHAO P6100 probes in New condition, MPN P6100, Country of Origin China. The common specs include switchable 1X/10X attenuation, 1MOhm input resistance at 1X, 10MOhm at 10X, 1X bandwidth DC-6MHz, 10X bandwidth 100MHz, and a 120cm cable. Because the electrical specs match, the differentiator is pack size.
Price and Pack Comparison
| Package | Listed price | Price bar |
|---|---|---|
| 2x 100MHz Oscilloscope Scope analyzer Clip Probe test leads kit for HP Tektronix | USD 17.99 | |
| 4 Four New 100MHZ Oscilloscope clip probes for HP Tektronix Hitachi, US seller | USD 29.99 |
The two-probe kit carries the lower total listed price. The four-probe set carries the higher total listed price but doubles the probe count.
Where Each Product Wins
The 2-probe kit works best when... you want the smaller total listed spend and need just two probes. The package includes a mini alligator clip, ground lead, and screwdriver. It suits a two-channel oscilloscope and keeps the initial outlay to the lower side of this pair.
The 4-probe set works best when... you want four probes available without buying a second package. It also works out to a lower listed price per probe than the two-probe kit, which makes it the more efficient route for multi-channel work.
Product Notes
#### 2x 100MHz Oscilloscope Scope analyzer Clip Probe test leads kit for HP Tektronix
The two-probe kit is the practical choice when your scope or current task only needs a pair of leads. Each probe is a JINHAO P6100 with 100MHz 10X bandwidth and a 120cm cable. The retail package also includes one mini alligator clip, a ground lead, and a screwdriver, so the extras are already in the box. The limitation is the probe count: with only two probes supplied, a four-channel setup would need a second purchase to be fully covered.
#### 4 Four New 100MHZ Oscilloscope clip probes for HP Tektronix Hitachi, US seller
This set supplies four JINHAO P6100 probes, enough to cover four scope channels in one purchase. The title notes a US seller and the pack count is explicit in the name. The per-probe listed price is lower than the two-probe kit, which makes the set attractive for regular multi-channel work. The trade-off is the higher total listed cost and the simple fact that you might not need four probes if your bench only has two channels.
Final Choice by Use Case
Choose the 2x 100MHz Oscilloscope Scope analyzer Clip Probe test leads kit for HP Tektronix at USD 17.99 when two probes are enough and you want the lower total listed price.
Choose the 4 Four New 100MHZ Oscilloscope clip probes for HP Tektronix Hitachi, US seller at USD 29.99 when you want four probes ready for multi-channel work and don't mind the higher total listed price.
