Is a two-pack of clip probes the fix for your oscilloscope setup?
When your oscilloscope bench is short on probes or you want a dedicated lead for each channel without constantly reconnecting, the real question is whether a clip-style two-pack can cover your frequency and voltage range. This kit sets out to answer that with switchable clip probes, mini alligator clips, and ground leads.
Quick Verdict
For hobbyist bench work and general-purpose signal tracing, this kit is a practical choice if you want a spare pair of clip probes with a 100MHz rating. The 10X setting provides 10MΩ input resistance and 100MHz bandwidth, while the 1X setting covers DC to 6MHz with 1MΩ input resistance. At USD 17.99, you get the two probes, mini alligator clips, and ground leads in one package.
Who It Suits
This kit is aimed at users looking for replacement clip-style test leads for an HP or Tektronix oscilloscope. It also suits anyone who frequently works through exposed leads or component legs, because mini alligator clips let you hook on instead of holding a fine tip in place. If you need a second channel set up quickly, having a dedicated lead ready saves you from moving one probe back and forth.
What Stands Out from the Listed Details
2x 100MHz Oscilloscope Scope analyzer Clip Probe test leads kit for HP Tektronix
The main draw is the two-pack format: you get two clip probes with mini alligator clips and ground leads. Each probe is switchable between 1X and 10X attenuation. On 10X, input resistance is 10MΩ and bandwidth is 100MHz; on 1X, input resistance is 1MΩ and bandwidth is DC to 6MHz. The 120cm cable length and 55g weight per probe make it easy to route leads around a crowded bench.
One concrete reason to choose this kit is the switchable attenuation. You can leave it in 10X for most scope work and drop to 1X when you need the full signal without attenuation, as long as you stay within the listed limits. The trade-off to keep in mind is the input rating: 300 VDC plus peak AC in 1X mode and 600 VDC plus peak AC in 10X mode. The operating temperature range of -10°C to +50°C also sets a boundary for where it can be used.
Meaningful Trade-Offs
Because this is a clip probe kit rather than a fine-point set, it is better for attaching to exposed leads, terminals, or component legs than for poking into tight spaces. The low-frequency setting tops out at 6MHz, so for higher-frequency measurements you will want to use the 10X mode. The voltage ratings also make it clear this is not the kit for probing high-voltage circuits beyond 600V peak AC in 10X mode.
Bottom Line
If your scope work stays within the rated bandwidth and you want clip-style probes with ground leads for around USD 17.99, this kit is worth weighing. The switchable attenuation, 120cm cable, and included ground leads give you solid flexibility for the price. Just confirm that your signal voltages stay within the listed ratings and that your circuits do not push past the probe bandwidth.
