Choosing an oscilloscope probe isn't just about grabbing any cable. The probe has to match your scope's input and handle the voltage you're measuring. The 2X100MHz Oscilloscope Scope Analyzer Clip Probe Test Leads Kit asks a practical question: can one affordable set cover bench testing without breaking the bank?
Quick Verdict
At USD 12.49, this kit gives you two 100 MHz probes with switchable 1X/10X attenuation, plus ground leads, a screwdriver, marker bands, and two tip locating sleeves. It's a straightforward option if you're working with a scope rated up to 100 MHz and want a complete set rather than hunting for parts.
Who It Suits
If you need spare or replacement probes for a 100 MHz scope, this kit is practical. The included mini alligator clip ground lead and adjustable compensation range make it suitable for general circuit probing, especially for hobbyists and repair benches.
What Stands Out
The probes offer 1X and 10X settings. In the 10X position, bandwidth reaches 100 MHz with a 10 M-ohm input resistance. The 1X position runs DC to 6 MHz and 1 M-ohm input resistance. That split lets you switch between high-frequency signals and lower-level measurements. The 120 cm cable gives a reasonable reach, and the compensation range is 10 to 35 pF. The kit also includes two probe tips, alligator clips, a screwdriver, marker bands, and tip sleeves, so you don't need to buy extras separately.
The attenuation ratio is set with a coaxial reed switch, which makes switching between 1X and 10X quick during a measurement session.
Meaningful Trade-Offs
The most important limitation is the bandwidth ceiling. This kit is built for scopes with bandwidth up to 100 MHz. If your instrument needs more than that, this probe set won't be the right match. Also, the 1X path tops out at 6 MHz, so don't expect full bandwidth when the switch is in 1X. The maximum input voltage is higher in 10X mode at 600 VDC plus peak AC, while 1X mode is rated at 300 VDC plus peak AC, so the setting you choose affects your voltage headroom.
Bottom Line
If you're looking for an inexpensive, complete two-probe kit for a 100 MHz scope, this set offers a lot for the listed price. The package includes the accessories you need to start probing, and the switchable attenuation gives you flexibility. Just match it to your scope's bandwidth and input capacitance range, and it can be a solid bench addition.
2X100MHz Oscilloscope Scope Analyzer Clip Probe Test Leads Kit for HP Tektronix
This two-probe kit is listed at USD 12.49 and includes the probes, ground leads, a screwdriver, marker bands, and tip locating sleeves. The 10X mode gives you the full 100 MHz bandwidth, while the 1X mode is limited to 6 MHz, so keep that in mind before you switch. The compensation range of 10 to 35 pF helps it work with a variety of scope inputs, but the 100 MHz maximum bandwidth is the ceiling you'll want to respect.
