When you're setting up an oscilloscope bench for signal-analysis work, the first decision is usually feature breadth versus model clarity. Hantek offers two new digital oscilloscopes at different prices: the DSO2000 series at USD 199.97 and the DSO2D15 at USD 370.50. The spread is USD 170.53, with the DSO2000 series about 46% below the DSO2D15.
Quick Verdict
If you want a wider documented feature set and a lower price, choose the Hantek DSO2000 series. If you want a direct New In Box DSO2D15 with the model number front and center, choose the Hantek DSO2D15.
Side-by-Side Snapshot
| Model | Listed price | What stands out |
|---|---|---|
| Hantek DSO2000 series (DSO2D10) | USD 199.97 | 2CH+1CH, 1 GSa/s sampling, 25 MHz AWG, 8M memory depth, RS232/UART/I2C/SPI/CAN/LIN decode |
| Hantek DSO2D15 | USD 370.50 | New In Box, DSO2D15, 150 MHz, 2CH digital storage oscilloscope |
Where Each Product Wins
The DSO2000 series wins on documented feature value. Its title spells out 2CH+1CH, 1 GSa/s real-time sampling, 100/150 MHz analog bandwidth, and a 25 MHz waveform generator; the listing goes on to include 8M memory depth, 32 automatic measurements, a 3-digit voltage meter, a 6-digit frequency counter, and a long set of trigger and bus decode options. You get a much fuller spec sheet at the lower listed price.
The DSO2D15 wins on model specificity. The title repeats HANTEK DSO2D15 as a New In Box digital storage oscilloscope, and the model and product number are both DSO2D15. If you already know you need a 150 MHz, two-channel scope, that direct identity removes the need to sort through a series name.
Product Notes
Hantek Digital DSO2000 Series (DSO2D10)
The DSO2000 series entry is the feature-heavy choice. It opens with 2CH+1CH, 1 GSa/s maximum real-time sampling, 100/150 MHz analog bandwidth, and a 25 MHz built-in waveform generator. From there you get 8M memory depth, a vertical range of 2 mV/div to 10 V/div, 8-bit vertical resolution, 32 auto measurements, a 3-digit voltmeter, a 6-digit frequency counter, and bus decode for RS232/UART, I2C, SPI, CAN, and LIN. The main limitation is in the label: the title names a series with 100/150 MHz options and the model points to DSO2D10, so it is not a single hard 150 MHz model statement. That is a trade-off only if model clarity matters more than a broad feature list.
Hantek DSO2D15
The DSO2D15 is the more focused listing. It says New In Box, HANTEK DSO2D15, 150 MHz, 2CH digital storage oscilloscope, with the model and product number both matching. The built-in 25 MHz waveform generator applies to the DSO2D10 and DSO2D15, so this model shares that capability even though the DSO2D15 entry is shorter. The limitation is on the documentation side: the listed information stays with the storage-oscilloscope basics and leaves the detailed spec sheet to the DSO2000 series entry. If you want memory depth, trigger options, and decoder lists spelled out in the same place, the DSO2000 series is the one that provides them.
Final Choice by Use Case
Choose the Hantek DSO2000 series if a long, documented feature set at the lower end of the price spread matters most to you. Choose the Hantek DSO2D15 if you want a New In Box DSO2D15 with an explicit 150 MHz label and a single model identity. Both are new Hantek digital oscilloscopes, so the real decision is between more documented capability and more direct model clarity.
