When you need to connect an oscilloscope to a circuit under test, a reliable clip probe kit is essential. In the test leads, probes, and fixtures category, two kits stand out: the JINHAO and the Peakelect. They take slightly different approaches to the same job, so the best pick comes down to the details that matter on your bench. One kit leans on a detailed spec sheet; the other leans on ready-to-use accessories. That distinction matters when you're standing at the bench with a probe in hand.
Quick Verdict
The Peakelect kit is the one to grab if you want a ready-to-use pair with a few extras included. The JINHAO kit is the choice if you prefer a probe set that spells out its electrical specs clearly. Both are new options for everyday oscilloscope work. The right pick depends on the signals you chase and how much detail you want before you clip on.
At a Glance
| Attribute | JINHAO Clip Probe Kit | Peakelect Clip Probes |
|---|---|---|
| Listed price | USD 17.99 | USD 19.99 |
| Pack quantity | 2 probes | 2 probes |
| Bandwidth rating | 100MHz (10X) | 200MHz |
| Attenuation ratios | 1X and 10X | 1X and 10X |
The table shows the headline numbers; the details below explain what they mean on your bench.
Where Each Product Wins
- JINHAO wins for specification transparency, with input resistance and capacitance values listed clearly.
- JINHAO wins for the 120cm cable length and interchangeable probe tip.
- Peakelect wins for the included grounding crocodile clip and accessory kit.
- Peakelect wins for the smooth, easy-to-use probe surface.
Product Notes
JINHAO Clip Probe Kit
The JINHAO clip probe kit is built around the TP6100 series and delivers a depth of detail that's rare at this level. You get input resistance of 1MΩ in 1X mode and 10MΩ in 10X mode, with input capacitance ranges of 85-135pF and 18.5-22.5pF respectively. The 120cm cable provides good reach across the bench, and an interchangeable probe tip plus a coaxial reed switch are included. The reed switch lets you change attenuation without swapping the tip, which speeds up bench work. The net weight is 55g, so the probe feels light on the cable. You'll want to respect the maximum input voltage of 300VDC+peak AC in 1X and 600V in 10X, and the operating temperature range of -10°C to +50°C covers typical indoor use. If your probing stays within those limits, this is a well-specified pair. For applications that need a clearly documented probe, the JINHAO gives you the numbers to work with.
Peakelect Clip Probes
The Peakelect clip probes are for those who want extra bandwidth headroom. The set offers a 1X/10X sliding switch that toggles attenuation without pulling the probe apart, plus a grounding crocodile clip that simplifies ground connections. The accessory kit adds useful bits for various hookups. At $19.99, it costs $2 more than the JINHAO kit, which makes it the pricier option of the two. That small premium buys you the 200MHz rating and the included grounding clip. The smooth surface is easy to use. If you regularly probe signals that need that headroom, this is the kit to grab.
Final Choice
Choose the JINHAO if you want a fully specified probe kit and are comfortable with the input voltage limits. Choose the Peakelect if you prefer a ready-to-go kit with extras included. This decision comes down to whether you prefer a spec sheet or a grab-and-go kit.
