Quick Take
Choosing between these oscilloscope clip probes comes down to how many channels you need to probe at once and how much bandwidth your work actually uses. All four kits are new 1X/10X switchable clip probes, but the lineup splits into a pair of budget two-probe sets, one two-probe set with a higher bandwidth rating and an accessory kit, and a four-probe set that costs the most. If you want the most probes per purchase, the four-pack is the straightforward pick. If you want more headroom and extras for a two-channel bench, the higher-bandwidth two-pack makes a stronger case. For basic work on a tight budget, the two lower-priced two-packs are enough.
Price Comparison
| Product | Listed Price | Price Bar |
|---|---|---|
| 4 Four New 100MHz Oscilloscope Clip Probes (HP/Tektronix/Hitachi, US seller) | USD 29.99 | |
| Peakelect 2-Pack Oscilloscope Clip Probes 200MHz with Accessory Kit 1X 10X | USD 19.99 | |
| 2x 100MHz Oscilloscope Clip Probe Test Leads Kit (HP/Tektronix) | USD 17.99 | |
| 2x 100MHz Oscilloscope Clip Probe Test Leads Kit (HP/Tektronix) | USD 17.99 |
Decision Matrix
- Four-channel benches or spare-probe needs: the 4-pack JINHAO set gives you twice as many clips as the two-probe kits.
- Two-channel setups that want extra bandwidth and a bundled accessory kit: the Peakelect 2-pack is the only higher-bandwidth option and the only one with an accessory kit.
- Budget testing: either of the two low-priced two-packs at the bottom of the range offers the same pair of probes.
- Compensation range matching: the two low-priced two-packs list different compensation ranges, so pick the one that lines up with your scope's input capacitance.
Product Notes
4-Pack JINHAO 100MHz Oscilloscope Clip Probes (US Seller)
This P6100 series set comes as two packages that total four probes, with the 1X/10X switch, 120cm cable, and a 100MHz rating for general-purpose bench work. The reason to choose it is the simple math: you get twice as many clips as the two-probe kits without moving to a different probe design. The description also clarifies that the two packages are identical, so you have two full pairs to use or keep as spares. The limitation is that you pay the top of the price spread, and if your scope only has two channels, half of the probes will spend most of their time in a drawer.
Peakelect 2-Pack 200MHz Oscilloscope Clip Probes with Accessory Kit
The Peakelect is the speed pick of the group: the only two-pack rated at 200MHz, and it arrives with an accessory kit. The 1X/10X sliding switch and the grounding crocodile clip make attenuation changes and stable connections straightforward, and the clip keeps the reference path secure while you move the probe tip. Choose this one when you want the bandwidth cushion for faster signals and don't need four probes. The limitation is the two-probe count; if you need to watch four signals at once, you will need two sets, which pushes the total above the four-pack. But for a two-channel bench, it gives you the highest rated bandwidth in this roundup.
JINHAO 2x 100MHz Oscilloscope Clip Probe Test Leads Kit (HP/Tektronix)
This two-probe kit lands on the lower end of the price range and keeps the setup simple. The package includes two probes, mini alligator clips, ground leads, and a screwdriver for trimming the compensation, so you can handle the small adjustments that come with switching 1X and 10X modes. The 1X/10X switching and 120cm cable cover standard oscilloscope work without extra frills. Its strength is the low entry price and the included adjustment tool. The limitation is the bandwidth cap; if your measurements involve fast digital edges, the Peakelect's higher rating offers more headroom.
JINHAO 2x 100MHz Oscilloscope Clip Probe Test Leads Kit - TP6100 Series
This is the other low-priced two-pack and the only set in this group that names the TP6100 series and lists Model P6100. It carries a 15 to 45 pF compensation range, which is a useful detail when you know your scope's input capacitance; the other low-priced two-pack lists a 10 to 35 pF range. Choose it if that range aligns with your input stage. The 120cm cable and 1X/10X switching match the rest of the JINHAO two-packs, so it is not a different form factor. The limitation is the shared bandwidth ceiling and two-probe count, so it is not a bandwidth upgrade or a four-channel solution.
Final Recommendation by Use Case
If you want the most clips in one purchase, go with the 4-pack JINHAO set at $29.99. If you want a two-channel solution with the higher bandwidth rating and an accessory kit, the Peakelect 2-pack at $19.99 is the more versatile choice. If you want to spend the least and only need basic probes, either of the two $17.99 two-packs will serve; choose the one whose compensation range matches your oscilloscope's input capacitance. The four-pack is also the pick if you expect to expand to more channels later, while the Peakelect is the better day-to-day two-channel companion.
