When you're shopping for data acquisition recorders, the first decision is usually about how much flexibility you need versus how specialized the measurement job is. These two units take opposite approaches: the ThermoFisher DataTaker DT82I Series 3 Industrial Data Logger w mount is a used, general-purpose industrial logger, and the Madgetech PR1000-300-PSIG Pressure and Temperature Data Logger, 0 to 300 psig is a new, purpose-built pressure and temperature instrument.
Quick Verdict
If you want a less expensive, general-purpose industrial logger and you're comfortable buying a used unit, the ThermoFisher DataTaker DT82I Series 3 is the one to start with. If you need a new instrument that measures pressure up to 300 psig and temperature, the Madgetech PR1000-300-PSIG is the better fit.
Comparison at a Glance
| Product | Price | Condition | What It's Built For |
|---|---|---|---|
| ThermoFisher DataTaker DT82I Series 3 Industrial Data Logger w mount | USD 249.99 | Used | General industrial data logging with a mount included |
| Madgetech PR1000-300-PSIG Pressure and Temperature Data Logger, 0 to 300 psig | USD 699.00 | New | Pressure and temperature logging up to 300 psig |
Where Each Product Wins
- ThermoFisher DataTaker DT82I Series 3 wins on price and flexibility. It's the more affordable entry point, and the industrial data logger positioning makes it a broader tool for recording measurements.
- Madgetech PR1000-300-PSIG wins on specialization and new-condition assurance. It arrives new, measures 0 to 300 psig, and pairs pressure with temperature logging inside a fully submersible body.
Product Notes
ThermoFisher DataTaker DT82I Series 3 Industrial Data Logger w mount
The ThermoFisher DataTaker DT82I Series 3 is a used industrial data logger that comes with a mount, and its $249.99 price puts it well below the $699.00 Madgetech. That makes it the better match if you're starting out in data acquisition and want to keep initial spending lower. The product title highlights an industrial data logger and includes a mount. Because this is a pre-owned unit, the seller notes it looks and works great and is complete with what's shown in the photos. The tradeoff is condition: you're choosing a used device over a brand-new one. If you need a basic, less expensive logger for varied measurement tasks, this is the practical choice.
Madgetech PR1000-300-PSIG Pressure and Temperature Data Logger, 0 to 300 psig
The Madgetech PR1000-300-PSIG is a new pressure and temperature data logger with a specific measurement range: 0 to 300 psig. It uses a ¼-inch NPT fitting for connection, and its fully submersible body-4 inches tall and 1 inch in diameter-makes it well suited to wet or harsh environments. The internal temperature sensor covers -40 to 176°F with an accuracy of ±2.0°C, and the logger can store more than 1.3 million readings. It also works with MadgeTech 4 software, so you have a dedicated tool for configuring and working with the device. The higher $699.00 price reflects a new, specialized instrument rather than a used generalist. If your job centers on pressure readings up to 300 psig and temperature logging in one package, this is the stronger option.
Final Choice by Use Case
- General-purpose logging with the ThermoFisher: Choose the ThermoFisher DataTaker DT82I Series 3 Industrial Data Logger w mount for varied measurement tasks and a lower price.
- Pressure and temperature monitoring: Choose the Madgetech PR1000-300-PSIG Pressure and Temperature Data Logger when you need a submersible device designed for that specific job.
- New-condition instrument: Choose the Madgetech if you prefer a factory-fresh device over a pre-owned logger.
- Lower initial spend: Choose the ThermoFisher if keeping the purchase price as low as possible is your priority.
